377

[RatDime]

I'm tossing the 355 I have for now a 377 build. I don't want it to scream all that much hence my ride is set up for 1/8 mile (th350 with 4.56's) I have a team g intake a 750 dp holley goin on it. It has a nice forged steel crank and eagle rods with flat top kb's yeilding 11.1 c/r with 64cc heads. Ive got a set of 906 vortecs with comp cams roller rockers Im steering away from. Like to get a set of sportsman 2's for it. But cam ideas is what Im after. Like to hear some combos out there or a name to where I can discuss my build....

[mytmouz]

Around 630 on a solid roller and the sportsman 2's would be good if strip only, they like rpm's, so small cams are a killer for them. They need to breathe. I ran 570's on a 275 shot with my last one...

[RatDime]

well they have flat top pistons with 2 releifs, saying 11.1 compression. How much lift will I getaway with, of course Im going to check it. Be neat to buzz it 7500+ rpms. I was thinking of a solid flat tappet with 57-.590 lift. I still would like to drive it on the street some.

[mytmouz]

Hard to guess how much you can get away with. Too many variables, you SHOULD be fine with that lift, in most instances...