Mike or Everett?

[421s10]

hey guys im going to be putting my DAGGERS on this weekend and need to know exactly how to do it and set them..i got my Moser axles so im going to be putting everything in this weekend..thanks a ton guys..

[Bacon]

You need any help?

[434 smallblock]

its easy put your back brackets on the shackles disconnect the fron of the leaf spring one at a time,use floor jack to support front of spring slide the bracket over the spring use bolts supplied put the tube in with the weight off the spring

[421s10]

You need any help?

if you want to help ill take it...thanks

[dand355]

racers helping racers.......

[Bacon]

if you want to help ill take it...thanks

No problem, just let me know when you want to work on it and ill ride up there and help ya.

[421s10]

hey everett...the bolt that goes threw my front bracket is way bigger then the stock bolt...it has 2 bushings that go on each side of the front bracket but the holes in them are bigger then my stock bolts too..do i need to make me some more bushings?

[421s10]

hey Nick pm your number again

[Bacon]

hey Nick pm your number again

sent.

[434 smallblock]

hey everett...the bolt that goes threw my front bracket is way bigger then the stock bolt...it has 2 bushings that go on each side of the front bracket but the holes in them are bigger then my stock bolts too..do i need to make me some more bushings?

what do you mean by bigger do you mean longer? If so they suld tighten up but you dont want to kill them. There should be a ftat washer and a lock washer tighten till the lock washer is collapsed and then a small tug so the bracket can move

[421s10]

what do you mean by bigger do you mean longer? If so they suld tighten up but you dont want to kill them. There should be a ftat washer and a lock washer tighten till the lock washer is collapsed and then a small tug so the bracket can move

no im talking about the bolt being a bigger diameter not longer...it want go threw the hole in my leaf spring

[434 smallblock]

no im talking about the bolt being a bigger diameter not longer...it want go threw the hole in my leaf spring

dang thats unusaul i will call mike and check it out

[421s10]

thanks man

[421s10]

ok Everett.. i got the Daggers put on now how do i adjust them? how many turns are what?

[434 smallblock]

Call me I will walk you through it 803-269-8743

[421s10]

ok ill be giving you a shout thanks a ton man

[Diabolical]

Let me know how it goes..
They should have been adjusted when you got them.. But, I want Everett to walk you through
it.. I am swamped right now..

Mike

[421s10]

Call me I will walk you through it 803-269-8743

everett im going to try to go to the track next weekend so if you dont care ill be calling on walking me threw setting up my daggers..thanks bro

[421s10]

Let me know how it goes..
They should have been adjusted when you got them.. But, I want Everett to walk you through
it.. I am swamped right now..

Mike

mike they have been moved so many times in the garage that there is no way they stayed set...lol

[Diabolical]

got ya ;)