Manual Brake Conversion Template

[The Exterminator]

Found it on a G body forum works great.............................


P.S. The top holes do not have to be oblong they can be normal holes as long as they are exactly straight across with the center of the big hole. I made mine this way and works great.

[bluehair]

fixin to change mine out to, thanks for the info!:rock:

[The Exterminator]

Also i found a company selling just the manual brake rod kit for less than $20.00 !

it is http://www.resto-modtechnology.com/servlet/the-206/MANUAL-BRAKE-PUSH-ROD/Detail

They have a bunch of other cool stuff also.


****As a safety precaution you can pull your piston out of the master and make the pushrod fit deeper i just gauged it and made sure it did not go to far. It really helped mine alot and made sure it would not fall out. And the rubber boot on the push rod helps also. There is a secondary hole to the right of the brake light switch put a large bolt stopper nut and nut and make that a true stop for the brake pedal also ! Just a few little tricks i have found.

[Diabolical]

This is an excellent post..
Sticky!!!