My new motor build

[Diabolical]

As most of you know.. I threw a rod at the Nationals.
This time I am getting serious. A 434ci bad boy!

I will keep adding to this thread until the motor is complete.

Here are some pics of the heads..

A little info.
AFR 227 Spreadport SBC CNC heads.
(8mm 2.10/1.6), springs (240 pounds @ 1.9" on the seat), and titanium retainers.
Jesel Pro Shaft System.
Major clearancing to accept the Jesel Pro Shaft System with up to 7/16" pushrods..
The heads have been polished in both, the ports and CC, and in all the oil return areas for faster oil return.
These heads flow 2% better than the AFR 227 Comp Heads.
The pushrods in the pictures are Jesel 7/16" double taper pushrods.
These heads started off fully CNC-ed at AFR, and then modified from there.
So all the ports and chambers are very consistent.

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5636

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5635

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5634

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5633

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5632

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5631

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5630

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5629

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5628

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5627

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5626

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5625

[406shark]

Those are some nice heads... should work well with the 434. What intake are you gonna run?


Jeff

[Disturbing V6]

Nice

[Diabolical]

AFR Titan TXR
http://www.airflowresearch.com/product_info.php?cPath=79_81&products_id=363
I am ordering it in 2 weeks.. (I hate waiting)
http://www.jegs.com/i/AFR+-+Airflow+Research/033/4801/10002/-1
http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5637

Here are some better ones
http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5638

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5639

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5640

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5641

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5642

http://www.s10racer.com/board/picture.php?albumid=453&pictureid=5643

[thumpn]

oooooooooooooooo them heads are shinny!!!!!

[jameskirk1]

Was wondering how long it would take for someone to come out with a polymer intake for gen 1 sbc...

Cant wait to see this thing come together you freakin' baller!!! You must be sweet talkin' the enabler :D

[quicks10]

Gonna be chopping some heads with that..

[Mrs. Secretary]

LOL! It's called LOVE!!! ;)

Nice looking Mike; now..."Git Er Done!"

Was wondering how long it would take for someone to come out with a polymer intake for gen 1 sbc...

Cant wait to see this thing come together you freakin' baller!!! You must be sweet talkin' the enabler :D

[85ss]

As most of you know.. I threw a rod at the Nationals.
This time I am getting serious. A 434ci bad boy!
........................



Mike that 434 ain't gonna help that tranny problem! :laughoutloud:
What you gonna do when my little motor puts that monster in the rear view? :stirpot:


Seriously Mike, gonna be bad ass!

[spib]

afr heads with shaft rockers, I LIKE YOUR SETUP!!!!!!!
do it right mike, hell ya!!!!

[bluehair]

love afrs , just talked to em the other day about that intake guy clouldnt tell me if a fogger could be plumbed into one , do you know?

[88LT1Blazer]

Nice Mike!!!!
Looks like it's time to start selling some Daggers and cross members to fund this monster project.

:stirpot::stirpot::stirpot:
:drummer::)

[sevenseven]

Nice Mike!!!!
Looks like it's time to start selling some Daggers and cross members to fund this monster project.

:stirpot::stirpot::stirpot:
:drummer::)

x777 lol

[434 smallblock]

love afrs , just talked to em the other day about that intake guy clouldnt tell me if a fogger could be plumbed into one , do you know?

If I am correct they come with bosses allready tapped for a fogger

[434 smallblock]

That is sick Mike I shall need them there shaft rocker setup sir

[1fast10]

youll love the sahft system. i have them on my afr220s and they almost never get out of whack.

[mycamaros]

seen this in the clearance rack at summit.. http://www.summitracing.com/parts/WRL-110005/

[xten]

I've had good luck with AFR too Mike. Compared to most I've seen, they look like a work of art inside, so much nicer than most of the other heads I've seen, right out of the box. If I could spend that much on a motor, I would have bought that one you bought. No joke. It's exactly what I'm looking for if I go 1st gen sbc.I hope it's an ass kicker for ya and you get good service from it. Good luck with it buddy.

[406 Sonoma]

Nice stuff Mike I remember when I spent all of that hard earned money good luck with the build should be badd ass.

[Kelly Kilbourne]

Nice parts Mike......but the push rods are alittle over kill. Save some weight and get some 3/8 pushrods.

[spib]

youll love the sahft system. i have them on my afr220s and they almost never get out of whack.
x2 I have t&d shaft rockers luv em:cool4:

[TheLuv]

:yikes: Ya cant hide Money!! Man that is fine.

[bluehair]

makes me wanna tear mine down now! lol :21::21::21:

[jameskirk1]

If I am correct they come with bosses allready tapped for a fogger

Does it have some kinda burst panel? Cause plastic and nitrous usually don't go together very well :speechless:

[quicks10]

Does it have some kinda burst panel? Cause plastic and nitrous usually don't go together very well :speechless:

going to make a good souvenir if they do pop.......

[J.D.Rhodes]

oohhh my freakin g%^d thats baddass dude !!!

[Mad Max]

WOW - that intake is killer. It probably weighs as much as a sneaker. :laugh4:
You can't get much better than those heads and rockers.
Super nice set up. :bling::bling:

[421s10]

nice parts Mike

[Proshot]

those are some nice parts keep us posted so whats the flow on these heads?
I love my AFR on my Ford they work!!