Project 89 s10

[satterfield8]

Hey everbody ill strat off to say im 15 and my names austin this is my truck had it about 3 or 4 months paid 400 what you think


when i first got it had a 2.5 and a 5 speed
http://i1137.photobucket.com/albums/n502/satterfield8/downsized_1030001100.jpg

gave it a wash
http://i1137.photobucket.com/albums/n502/satterfield8/downsized_1030001230.jpg

the interior not bad for 250000 miles:cool4:
http://i1137.photobucket.com/albums/n502/satterfield8/5.jpg

trade for these wheels looks a lot better
http://i1137.photobucket.com/albums/n502/satterfield8/12.jpg

cleaned up the frame and undercoated it
http://i1137.photobucket.com/albums/n502/satterfield8/23.jpg

random pic
http://i1137.photobucket.com/albums/n502/satterfield8/21.jpg

my azz
http://i1137.photobucket.com/albums/n502/satterfield8/22.jpg

front end shoot and the piece of sheet metal i paid
http://i1137.photobucket.com/albums/n502/satterfield8/104.jpg


got the frame mounts on what a pain in the azz
http://i1137.photobucket.com/albums/n502/satterfield8/24.jpg


took my fire wall apart and painted it
http://i1137.photobucket.com/albums/n502/satterfield8/f.jpg

made this for my gagues
http://i1137.photobucket.com/albums/n502/satterfield8/0228011448.jpg

this is how it sits right now
http://i1137.photobucket.com/albums/n502/satterfield8/bn.jpg

and thats about it of the truck but heres all the motor stuff
383 4 bolt block
041 heads
eagle rototaing assmbly
airgap intake
mallery dist
comp 280 magnum

my heads just reworked
http://i1137.photobucket.com/albums/n502/satterfield8/0204011516a.jpg

and my headers there sanderson 1 3/4 inch tubes and 3 inch collecter
http://i1137.photobucket.com/albums/n502/satterfield8/0225011800.jpg

here is my motor stuff is just sitting there
http://i1137.photobucket.com/albums/n502/satterfield8/3831.jpg

What youll think

[s10_406]

looks like a good strat... keep the pics coming

[m.a.d.]

good job austin, keep this thing rolling.

[satterfield8]

Thanks guys probably get out and do something later just got to get some motvation and ill prob have my shortblock put together in a week or to

[Tweeder]

put around all your links and they will post directly in the thread, so we dont have to click them:)

looks like a good start

[satterfield8]

Thanks man i was trying to figure that out didnt realy do much today beside sand on it because it was cold

[Tweeder]

I had those chrome wheels with the holes on my sonoma, they are pretty sharp

[wade w]

Truck looks like a great start. Keep at it.

[satterfield8]

Thanks guys realy apricate it should have a little update later just depends if the guy in the big brown truck comes and visits

[85ss]

Nice project Austin...
Welcome to the site also...

[satterfield8]

Thanks i dont live far from you i live in paris tn and you location says cedar grove that and that far right what track you race at

[satterfield8]

Do you guys think that i could use a 15x10 with a 5.5 bs or a 4.5 bs wich would be better and a 295/50/15 and it fit with out rubbing and can some of youll post pics of your trucks with 15x10

[xten]

Welcome Austin. Very good start. Keep us posted.

[satterfield8]

Thanks and i will my UPS buddy didnt come i called and they said it will be by the end of the week so youll have to wait and see

[2ndgen10]

You should be able to run 15X10 no prob, lots of guys are running them, its what I have on my truck, but I di move the frame in 2" each side. I just did that for piece of mind!
Truck looks to be off to a good start, Keep thrashing!

[HardinValleyMagic]

Good Start Austin. I too am running 15x10's out back 295/60/15. Think I have 4 1/2" backspace.

[satterfield8]

Thanks guys Hardinvalleymagic does you rubs or stick out any could you post a pic please
and 2gens10 im only 15 and weld once in my life but i would like to try and do that after i turn 16 and get a job ans can buy just a frame or something to do that on but my dad andt going to buy me anthor truck i already have 2 s10 and im 15

[bigfoot385]

Keep up the good work!!

[satterfield8]

Thanks man! cant do anything today its raining

[satterfield8]

My poor truck getting rained on

http://i1137.photobucket.com/albums/n502/satterfield8/9.jpg

[Tweeder]

getting washed*

I seen you asking around, the short waterpump works better. Thats what I'm using.

http://i269.photobucket.com/albums/jj47/billkarter/s10/CIMG1907.jpg

edit last years motor, different top end this year, but the same waterpump is making it back

[satterfield8]

Thanks! Man i was realy wonting to no cause of the altnater braket because i dont really like the long water pump brakets the cover the alt

i like this setup thats why i was asking

http://i1137.photobucket.com/albums/n502/satterfield8/1234.jpg

[Tweeder]

I'll post a pic of my alternator setup ect haha thats a friend of mines truck, it is mean. I'll let him know hes got questions to anwser over here.

http://i269.photobucket.com/albums/jj47/billkarter/s10/CIMG1969.jpg

[355dime]

hey man, thats my truck. this is what the pulley setup is that im using....the only thing is mine is a long water pump, i had to make a spacer for the crank to make it work for mine. didnt know it was for short water pump when i ordered it. also the fan on my alternator is a billet one i picked up at a swap meet, dosent come in the kit. make sure you get a couple spare belts if you run this, you will not find them anywhere local lol

http://www.jegs.com/i/Procomp+Electronics/746/PC2251/10002/-1

[satterfield8]

Ok thanks guys for the help ill figure out something but i realy like that build set up you got does it ever throw belts or anything and thanks for the pic

[satterfield8]

Cant doing anything today cause its raining again so i cleaned up some timing chain cover bolts and oil pan bolts with some gas.

[satterfield8]

board and made a oil pump primer out of a old HEI i had what you think not completely done yet

http://i1137.photobucket.com/albums/n502/satterfield8/op.jpg

[satterfield8]

Fianlly a decent update got my oil pump and harden rod and my 2-piece timing cover today hoping to get oil pan and pickup tomorrow


http://i1137.photobucket.com/albums/n502/satterfield8/0309011456.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/0309011506.jpg

[355dime]

i dont really throw belts, once in a while i have them a little too snug and the snap when i really romp on it.


good thinking on the home made oil pump primer, nice!

[satterfield8]

Thanks for the help and on the oil pump primer i was realy board and had to find something to do

[satterfield8]

here is a better pic of what my motor is going to look like

http://i1137.photobucket.com/albums/n502/satterfield8/mn.jpg

[m.a.d.]

looking good

[satterfield8]

Thanks! Dont think my oil pan is coming today :fighting15:

[355dime]

putting a motor together in the house. love it haha.

[satterfield8]

Yepp in the living room cant do it in my room wont fit threw the door

[satterfield8]

Well my oil pan is going to be here monday:rock: going to work on my truck today sense its nice out and going to a test and tune/swap meet tomorrow

[satterfield8]

Did a little so far today going to do a little more later

started like this

http://i1137.photobucket.com/albums/n502/satterfield8/t1.jpg

then this a bunnch of wires my dad is doing the wiring not me me and wiring dont
mix :nono:

http://i1137.photobucket.com/albums/n502/satterfield8/w1.jpg

Then stoped like this

http://i1137.photobucket.com/albums/n502/satterfield8/t3.jpg

[satterfield8]

didnt do much more put the fender back on painted the inside of it took the steering box of to clean it up and then went fishing going to the races tomorrow cant wait and there having a swap meet to

[satterfield8]

Went to the test and tune/swap meet and i was in heaven i got some new comp lifters for 14 bucks its all i had in my pocket and he wonted 20 for them saved me about 75 bucks from buying them from summit

http://i1137.photobucket.com/albums/n502/satterfield8/lifters.jpg

[Tweeder]

looking good.

[satterfield8]

Thanks!

[deimos]

looking good bud

[satterfield8]

Thanks! might go do something to it already theres a chance of ran today so idk

[satterfield8]

Did a little bit of body work today getting the old clear coat off

[satterfield8]

Update! Got my oilpan in today heres some pics :smile5:

http://i1137.photobucket.com/albums/n502/satterfield8/oil1.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/oil3.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/oil5.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/oil2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/oil4.jpg

[85ss]

Looking good Austin...

[satterfield8]

Thanks! Prob going to put shortblock together this weekend

[satterfield8]

Dont no if ill be able to do anything today cause of the stupid rain :fighting15: but o well

[satterfield8]

Well i got do something today changed the back window from a soild rear window to a sliding one what you think did it by myself to:smile5:

http://i1137.photobucket.com/albums/n502/satterfield8/w12.jpg

[Diabolical]

Nice..
That truck will be together before you know it!

[satterfield8]

Thanks! Dont think i will do much today cause i got to go out of town but i will tomorrow

[satterfield8]

Got my a cheapo torque wrench at harbor friaght tools and tomorrow im getting the gasket to put the short block together :cool4:

http://i1137.photobucket.com/albums/n502/satterfield8/tr.jpg

[Diabolical]

Right on..
That torque wrench will work fine..
You not building a shuttle ;)

[satterfield8]

Yep i got a snap on torgue wrench to its just got a dail on it, it dont click but where going to torgue it with the clicker and and check it with the snap on

[satterfield8]

Update! got my oil pan gasket and rear main seal today and some little stuff like drain plug oil pump stud a carb hat and a cam bolt thing puting the short block together saturday :smile5: heres some pics

http://i1137.photobucket.com/albums/n502/satterfield8/asss.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/ass.jpg

[satterfield8]

Undercoated my frame this morning still got to touch it up some but it looks good

http://i1137.photobucket.com/albums/n502/satterfield8/uc.jpg

[satterfield8]

Didnt d anything else today cause i went to my moms and painted her boyfriends boat for him putting the shortblock together tomorrow :cool4:

[satterfield8]

I also got some ARP main bolts today see

http://i1137.photobucket.com/albums/n502/satterfield8/arp.jpg

[satterfield8]

Update! got the short block together prob would have went better with a diff ring compresser but o while going to put the rest of the bottom together later heres some pics

http://i1137.photobucket.com/albums/n502/satterfield8/sb1.jpg
got one piston in and heres the rest

http://i1137.photobucket.com/albums/n502/satterfield8/sb2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/sb3.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/sb4.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/sb5.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/sb6.jpg

[sevenseven]

love the carpet!!

[satterfield8]

Me Too! i needed to built it im the house cause the only other thing is a shed that leaks

[satterfield8]

Well i got the oil pan a rear seal on now just need the cam if any bodys got a comp 280h or a xe274 thats new Pm me or commet here, heres some pics

http://i1137.photobucket.com/albums/n502/satterfield8/o3.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/o1.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/o2.jpg

[satterfield8]

Havent done much to the truck been going fishing and hanging out with friends i needed a break done a little bit of body work thats it

[jameskirk1]

Looks good man - keep it up!!!

[satterfield8]

Thanks going to do a little to ill have pics later

[satterfield8]

Done a little bit today fixed my rear spring pad now my truck sits right

When i started
http://i1137.photobucket.com/albums/n502/satterfield8/h3.jpg

Got it on
http://i1137.photobucket.com/albums/n502/satterfield8/h2.jpg

And no it sits right

http://i1137.photobucket.com/albums/n502/satterfield8/h3-1.jpg

[85ss]

Cool Austin...

[satterfield8]

Thanks!

[satterfield8]

Nothing to do today its rain :(

[satterfield8]

Done a little of body work Bonda/getting old clear coat off heres a pic

http://i1137.photobucket.com/albums/n502/satterfield8/r1.jpg

[smsmith36]

Good progress. That's a deep sump on that oil pan. Are you sure there's enough clearance for it?

[Tweeder]

my pan is deeper at the rear. it will fit, but it means pulling the motor before you pull the trans, and not as a package deal.

ps I hate my oil pan.

http://i269.photobucket.com/albums/jj47/billkarter/s10/CIMG1860.jpg

[satterfield8]

It should clear fine none of the rods it or anything i only but that pan cause i was doing a 383 i would have used a stock one if i would of done a 350 and tweeder is yours a home made pan

[East End Riders]

Looking good Austin!!!

[satterfield8]

Thanks!

[Tweeder]

It should clear fine none of the rods it or anything i only but that pan cause i was doing a 383 i would have used a stock one if i would of done a 350 and tweeder is yours a home made pan

nah its a 4x4 swap pan i bought a jimmy with a 355 in it, and used the pan. that motor is currently apart in my shop

[satterfield8]

Oh ok just wondering

[satterfield8]

Did a little today day had to take my leaf spring pad back outbecause where i weld the bolt on to it i didnt cut the head off all the way i thought it would be ok and today i noticed that it was all the way tight so that was i big pain in the azz but did a little body bulls**t me and bondo have a love hate relatship but thats all it did before it started to rain sorry no pics today

[satterfield8]

Havent done anything to the truck besides alittle wet sanding been guthering up some scrap to try and fund a 200 dollar s10 that i found no pics today sorry

[satterfield8]

Just ordered my cam going to be here monday :rock:

[satterfield8]

Done a little bit today adjust the vavles on the mower mowed the grass paint the back of my cab some other little stuff and i bought a oil presure gauge and a blancer bolt heres some pics hope my cam comes tomorrow and i also have a holley 850 dp for sale if anyone needs one

http://i1137.photobucket.com/albums/n502/satterfield8/p1.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/p2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/opb.jpg

[satterfield8]

Im not doing anything today its raining cats and dogs but i did get a front seal today puttin my cam in later i will have pics soon

[satterfield8]

Got my cam and lubed her up and stuck it in heres some pics on the specs sheet it looks like its saying 400 lift but the cam is 480 480 lift

http://i1137.photobucket.com/albums/n502/satterfield8/m1.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/m2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/m3.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/m4.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/m5.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/m6.jpg

[az03sonoma]

Nice project you got going there :rock:

Keep up the good work and keep the pics coming :10:



Tony

[satterfield8]

Thanks and i will

[85ss]

Sweet Austin!!!

[satterfield8]

Thanks!

[satterfield8]

Done a little today put my bed back i forgot what it looked like with a bed looks sweet done a little bonda and install my oil presure guage looks good dont have any pics of it in couldnt get a good shoot but heres some pics

http://i1137.photobucket.com/albums/n502/satterfield8/s10.jpg
how it sits now

http://i1137.photobucket.com/albums/n502/satterfield8/s102.jpg

[satterfield8]

Done a little swaped the chrome wheels back on this truck changed front brake lines misc. sorry no pics

[bluehair]

lookin good , keep up the good work ,bout the age I was when I built my first car a 69 el camino

[satterfield8]

Thanks! Done a little body work today clean up the cross member few odds and ends but the good news is im putting my Mo Mo in a week or two :rock:

[satterfield8]

Done a little more today of course body work some little misc. stuff tighten a leaky brake line and took front cap bascially getting it ready stuff in the motor its prob going sat or sooner if nothing goes wrong heres some pics

http://i1137.photobucket.com/albums/n502/satterfield8/v3.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/v.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/v2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/v4.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/v5.jpg

[buzhd]

Keep up the good work. Engine looks great. Must admit, love the engine in the house. Did that once; got forgiven after awhile.

[satterfield8]

no better place to do but in the house and Thanks!

[satterfield8]

Done a little wet sanding got me a intake and vavle cover gasket and put some stickers on the fire wall need a couple more though

http://i1137.photobucket.com/albums/n502/satterfield8/s.jpg

[satterfield8]

Didnt do anything to been out of town but i did get something

got it at harbor frieght tools need it cause the old one took a s**t
http://i1137.photobucket.com/albums/n502/satterfield8/hr.jpg

[pink panther]

very nice build i''ll be keeping eye on ur build keep up the good work.

[satterfield8]

Thank!

[satterfield8]

Done a little today it was raining so couldnt do to much but i got a transmount and put it on and my dad got this little gauge thing out and we found top dead centar tomorrow where going to bolt everything together and test fit in the truck cant wait :rock: heres some pics

looking for it
http://i1137.photobucket.com/albums/n502/satterfield8/tc2.jpg

found it
http://i1137.photobucket.com/albums/n502/satterfield8/tc.jpg

[satterfield8]

Putting my motor in today cant wait :) wish me luck ill have pics later

[az03sonoma]

Putting my motor in today cant wait :) wish me luck ill have pics later


Have fun dude. The project is looking good :rock::rock:



Tony

[satterfield8]

Thanks im half there had to come take a brake

[satterfield8]

Got that baby in there heres some pics

put the heads
http://i1137.photobucket.com/albums/n502/satterfield8/q1.jpg

taking motor stand thing off
http://i1137.photobucket.com/albums/n502/satterfield8/q2.jpg

attached the two dont mind my ugly trans
http://i1137.photobucket.com/albums/n502/satterfield8/q3.jpg

about to put it in there
http://i1137.photobucket.com/albums/n502/satterfield8/q4.jpg

got it in the first try to
http://i1137.photobucket.com/albums/n502/satterfield8/q5.jpg

put intake on
http://i1137.photobucket.com/albums/n502/satterfield8/q6.jpg

carb on
http://i1137.photobucket.com/albums/n502/satterfield8/q7.jpg

vavle covers on
http://i1137.photobucket.com/albums/n502/satterfield8/q8.jpg

sat the front cap to get a idea on the stance
http://i1137.photobucket.com/albums/n502/satterfield8/q9.jpg

dont think the hoods going to fit
http://i1137.photobucket.com/albums/n502/satterfield8/q10.jpg


it did about a half inch of clearence it wont with a air cleaner thought
http://i1137.photobucket.com/albums/n502/satterfield8/q11.jpg

heres the stance as of now
http://i1137.photobucket.com/albums/n502/satterfield8/q12.jpg

thats all for today going to put headers on tomorrow crossmember just the little stuff

[satterfield8]

Got a late start today but i got the headers on what a b***h heres some pics might go look at how to do the cross member later

passenger side
http://i1137.photobucket.com/albums/n502/satterfield8/he.jpg

drivers side
http://i1137.photobucket.com/albums/n502/satterfield8/he2.jpg

[satterfield8]

i ended up putting the cross member in yesturday it fit perfect to like the truck came with it i was amazed i though i was going to have to move it some how but it fit great might do some little stuff today dont realy no though cause it looks like its about to rain

[satterfield8]

didnt rain today so i done a little put the steering shaft in put front cap on for good and some headlight wiring heres some pics

random shot
http://i1137.photobucket.com/albums/n502/satterfield8/x.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/x1.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/truck.jpg

[85ss]

Cool Austin...
When you expect to fire it up?

[satterfield8]

Month or so i hope

[satterfield8]

Thank god for craigslist didnt do anything today went on a little road trip and trade my holley 850 for a freashly rebuild holley 750 dp and a shifter i prob wont use the shifter unless for temperay it was bonus on the deal guy need a 850 for his big block camero he was a pretty nice guy but heres some pics

this is what i traded
http://i1137.photobucket.com/albums/n502/satterfield8/holley.jpg

this is all i trade for it was a score
http://i1137.photobucket.com/albums/n502/satterfield8/hol.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/holl.jpg

looks good on there
http://i1137.photobucket.com/albums/n502/satterfield8/nm.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/nmm.jpg

heres the shifter
http://i1137.photobucket.com/albums/n502/satterfield8/sf.jpg

[satterfield8]

did a little today i went put the shifter in it started to grow on me i like it now got it in and ready to go and i cut the inside of core support up so i can tuck my raditor in there when i get one heres some pics

http://i1137.photobucket.com/albums/n502/satterfield8/sf2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/sf3.jpg

[littlewickeds10]

looking good!!!

[satterfield8]

Thanks! man ant doing nothing today its raining

[satterfield8]

well i got some bad news i gott to take it back out cause something is either wrong converter or the trans so now we have to take it back out it sucks but you got to do what you got to do

[satterfield8]

Sorry no updates been with out elet. for like 4 days it sucked had a bad storm so havent worked on my truck either but i did pull it back out and its the trans that was messed up so im going to memphis this weekend have updates later

[satterfield8]

took my trans to my uncle today it was a little piece of plastic the size of a penical lead that cuased all that trabule i need to learn how to spell some words but my trans is ready to go back in as soon as it would quit raining for a little while im getting tierd of this

[satterfield8]

got my blancer but on today going to put everything back in soon heres a pic

http://i1137.photobucket.com/albums/n502/satterfield8/b.jpg

[satterfield8]

Suprise Suprise got it back in went pretty soomth got the headers and steering shaft in will put the other stuff on tomorrow next is to get rockers and pushrods so i will have a finshed if wouldnt had got a ticket the other day :fighting15: i would have them now but owell heres some pics

http://i1137.photobucket.com/albums/n502/satterfield8/n1-1.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/n2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/n3.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/n.jpg

[satterfield8]

Done a little today cut up the core support to stff the raditor in there fits pretty could got to do a couple little things to it but its pretty much finshed i fit it to the orginal 4 cylinder raditor im not using it just used it for a refrence ill prob have to do some more mods later and i did a couple other little things to heres some pics

http://i1137.photobucket.com/albums/n502/satterfield8/r.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/r2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/r3.jpg

[Diabolical]

Nice work brother..
This is turning out very well..
Dont mind the bumps in the road.. ALL S10's have em ;)

[satterfield8]

i hear ya i've had a couple

[torq4u]

very nice !

[satterfield8]

Thanks!

[satterfield8]

havent done anything in the last couple days cause my other truck is acting up and i have to spend money tring to fix it out i order some pushrods and they cam in today there procomps chromley 1 piece 65 wall thickness heres some pics

suprise
http://i1137.photobucket.com/albums/n502/satterfield8/pr1.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/pr3.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/pr2.jpg

[satterfield8]

well my dad sold his old ford going to miss it a little but now we got some money to put in the truck :rock:

[m.a.d.]

keep moving along....looking good

[satterfield8]

Thanks! prob going to order some comp ultra golds today

[satterfield8]

No real updates or anything but i order some stanliess stell roller rockers and i got some vavle cover studs and some oil additive when my rockers get here i can finsh all my motor stuff but been having to spend money on my other truck because its been acting up but its going to be running prob around the end of june or beginning of july heres a couple pics

new studs look pretty cool
http://i1137.photobucket.com/albums/n502/satterfield8/st2.jpg

current state of the truck took fenders of to make it easier to bend trans lines
http://i1137.photobucket.com/albums/n502/satterfield8/st3.jpg

[85ss]

Getting closer Austin...
Will be burning rubber before you know it!

[satterfield8]

I no cant wait might get me in a little trouble :policeman:

[satterfield8]

Didnt do anything today but my rockers came in and they where well worth the 159 bucks there full roller staniless steel rockers and i got a dist. hold down clamp and a wix filter for after brack in going to try to put everything together tomorrow heres some pics

http://i1137.photobucket.com/albums/n502/satterfield8/ml4.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/ml3.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/ml2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/ml.jpg

[satterfield8]

Well got the stuff in went pretty smooth besides oil beening everywhere heres some pics

Pushrods and lifters in.
http://i1137.photobucket.com/albums/n502/satterfield8/bm.jpg

Sat rockers on.
http://i1137.photobucket.com/albums/n502/satterfield8/bm2.jpg

Screwed ploylocks on hand tight idk exactly hom to do vavle lash so
il have to wait tell my dad helps.
http://i1137.photobucket.com/albums/n502/satterfield8/bm3.jpg


New expensive timing tab.
http://i1137.photobucket.com/albums/n502/satterfield8/bm5.jpg

Looks pretty good on and you can see me!
http://i1137.photobucket.com/albums/n502/satterfield8/bm6.jpg

I also got a water temp gauge to go along with my oil presurre gauge
no just need the other to
http://i1137.photobucket.com/albums/n502/satterfield8/bm7.jpg

[buzhd]

You can definetly tell YOU have Pride in your Ride. Keep up the good work.

[satterfield8]

Thanks! Appreciated it.

[85ss]

Looking good...
What brand are those rockers?

[satterfield8]

idk know prob they came from kmj preformance im on a budget still but the look like a nice piece

[satterfield8]

well i got all the rockers set and put the intake on for good and vavle covers all i need to do is prime the oil my home made oilpump primer tool didnt work so well so ill have to buy one then i can time it and stick my dist in heres some pics

what it looks like with the bumper and other stuff of my other truck
http://i1137.photobucket.com/albums/n502/satterfield8/lm3.jpg

all adjusted tell we get it running
http://i1137.photobucket.com/albums/n502/satterfield8/lm2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/lm-1.jpg

[satterfield8]

done a little bit today made sure my timing tab was dead on and i timed it and stuck my dist in heres a pic

http://i1137.photobucket.com/albums/n502/satterfield8/dist.jpg

[85ss]

Getting closer!
Keep it up...

[satterfield8]

Thanks hoping to have it started by my birthday which is june the 21

[85ss]

Thanks hoping to have it started by my birthday which is june the 21

Sweet goal for the first day of summer!!!
Thats my older sister's birthday also!

[deimos]

coming along nicely man

[satterfield8]

Haha sweet and thanks deimos

[Rickracer]

I've been following your build, and I gotta say, I'm impressed with your work, and your dedication, especially for a guy your age, :thumbsup: :thumbsup:

[satterfield8]

Thanks apprecated

[satterfield8]

did realy do anything today but put my ballast on now just need coil and power filter then my dad can wire it up me and wiring = :nonod: im not very good at it i can wire gauges and stuff but not any hard wiring a almost fried a radio once luckily it bluw the fuse and not the radio :laughoutloud: heres a pic

http://i1137.photobucket.com/albums/n502/satterfield8/bla.jpg

[satterfield8]

didnt do anything yesturday helped a buddy though take the motor out of his so he can put his rebuild 2.5 in there heres a pic of it he only paid a hundread for it

http://i1137.photobucket.com/albums/n502/satterfield8/natan.jpg

[chevelledaddy]

Nice build....

[85ss]

Hey Austin, I have a MSD Blaster 2 coil, MSD 6AL, MSD 8.5 wires with points style ends already on them for under header route that I can sell cheap if interested...
Also have a Mallory 6AL if you would rather it than the MSD...

[satterfield8]

Thanks and about how much you thinking

[85ss]

PM sent...

[satterfield8]

sent you one back i think it went threw

[85ss]

sent you one back i think it went threw

Replied...

[satterfield8]

did a little today bolted my bed done and tail light wiring and cleaned it up a bit and i also made a parts list for everything a need to get it running good not driving it came to about 1600 after shiping i will be getting everything when my dad gets a big check which is in like 2 or 3 weeks but i will still need driveshaft, exhaust, tags, and wheels and tires i included mufflers in the exhaust im getting flow super 10's with 3 inch pipe heres a random pic from today

http://i1137.photobucket.com/albums/n502/satterfield8/truck2.jpg

[satterfield8]

well got a update i bought some AFR 195 heads brand new and everything else to get my truck running so im going wroom wroom soon all i need is a fuel pump and plugs but i got everything else will have a bunch of pics soon

[littlewickeds10]

heck yea. their very nice heads

[satterfield8]

i no cant what to get them only bad part is a have to take everything back apart but it's worth it for those

[Diabolical]

Very nice..
I agree.. Those are good heads.
You're on the down hill slide now ;)

[xten]

That's what's on my truck. You won't be disappointed.

[satterfield8]

Thanks i was hoping so should wake my motor up over those 041's

[satterfield8]

got a couple little things this morning

misc parts
http://i1137.photobucket.com/albums/n502/satterfield8/p.jpg

trans fluid and breck in oil
http://i1137.photobucket.com/albums/n502/satterfield8/oil.jpg

[satterfield8]

Well guys i got my afrs in and some other parts heres some pics

heres my parts bad thing is thats only have of them coming
http://i1137.photobucket.com/albums/n502/satterfield8/afr17.jpg

heres my air cleaner on there
http://i1137.photobucket.com/albums/n502/satterfield8/afr19.jpg

my tach, fuel regulater and some little caps
http://i1137.photobucket.com/albums/n502/satterfield8/afr20.jpg

Alu. water pump
http://i1137.photobucket.com/albums/n502/satterfield8/afr18.jpg

mini starter
http://i1137.photobucket.com/albums/n502/satterfield8/afr16.jpg

overflow can
http://i1137.photobucket.com/albums/n502/satterfield8/afr15.jpg

Flowmaster super 10's
http://i1137.photobucket.com/albums/n502/satterfield8/afr14.jpg

B&M Pro Stick
http://i1137.photobucket.com/albums/n502/satterfield8/afr13.jpg

Mallory coil
http://i1137.photobucket.com/albums/n502/satterfield8/afr12.jpg

Mallory wires
http://i1137.photobucket.com/albums/n502/satterfield8/afr11.jpg

Alt bracket
http://i1137.photobucket.com/albums/n502/satterfield8/afr10.jpg

Fuel Cell mounting kit
http://i1137.photobucket.com/albums/n502/satterfield8/afr9.jpg

battery box relocter kit
http://i1137.photobucket.com/albums/n502/satterfield8/afr8.jpg

12 Gallon RCI Fuel cell
http://i1137.photobucket.com/albums/n502/satterfield8/afr7.jpg

14x5 in air cleaner
http://i1137.photobucket.com/albums/n502/satterfield8/afr6.jpg

AFR's
http://i1137.photobucket.com/albums/n502/satterfield8/afr5.jpg

there pretty
http://i1137.photobucket.com/albums/n502/satterfield8/afr4.jpg

2.05 1.60 vavles
http://i1137.photobucket.com/albums/n502/satterfield8/afr3.jpg

CNC ported
http://i1137.photobucket.com/albums/n502/satterfield8/af2.jpg

AFR 195's
http://i1137.photobucket.com/albums/n502/satterfield8/afr.jpg

[satterfield8]

went got some more stuff today got a mini bike and a welder and auto darking welding helmet heres a couple pics

this little sucker is fast
http://i1137.photobucket.com/albums/n502/satterfield8/mini1.jpg

truck full of goodys
http://i1137.photobucket.com/albums/n502/satterfield8/mini2.jpg

[wade w]

I like the little bike. Will make a good track bike.

[buzhd]

The ups truck must tow a trailer when he comes to your house lol. Keep it up.

[satterfield8]

:laughoutloud: good one thats what we bought the bike for because its hurts my dad to walk alot from diabites but i like it and yeah i had a bunch of boxes

[bigfoot385]

Nice Work!! It's gonna be a awesome little truck!!

[satterfield8]

Thanks i just bought some 15x8 centerlines ill post some pics tomorrow

[85ss]

Nice parts Austin...
Should be up and running in no time...
Hollar at me when you do, maybe we can meet up at Gleason one weekend?

[satterfield8]

Thanks! and sounds good to me

[satterfield8]

got some centerline 15x8 wheels last night at my alt came today hoping for the rest tomorrow heres a couple pics

http://i1137.photobucket.com/albums/n502/satterfield8/at.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/at2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/at3.jpg

[chevelledaddy]

Centerlines are soooo old-school coool!!!!!

[satterfield8]

i like them though

[satterfield8]

got some more done put spark plugs in and fuel pump mounted tach mounted the coil to but im going to re do it heres some pics

got some more parts spark plugs,fittings,arp head bolts, kickdown cable, fuel pump, and shocks
http://i1137.photobucket.com/albums/n502/satterfield8/bs.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/bs2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/bs3.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/bs4.jpg

[Diabolical]

Nice progress.. Keep it up bro.

[satterfield8]

Thanks! porb work on it some this afternoon or tomorrow

[satterfield8]

done a little and got a little heres some pics

got some antifreeze and fuel/vacuam line
http://i1137.photobucket.com/albums/n502/satterfield8/z.jpg

got my raditor and fans
http://i1137.photobucket.com/albums/n502/satterfield8/z3.jpg

coil mounted
http://i1137.photobucket.com/albums/n502/satterfield8/z2.jpg

fuel line put on
http://i1137.photobucket.com/albums/n502/satterfield8/z4.jpg

[Diabolical]

Oh yeah!!

[satterfield8]

thanks

[satterfield8]

ok got some more stuff today and did some more heres some pics



got my driveshaft

http://i1137.photobucket.com/albums/n502/satterfield8/o.jpg



got it in not so good pic

http://i1137.photobucket.com/albums/n502/satterfield8/oo.jpg



raditor with fans installed

http://i1137.photobucket.com/albums/n502/satterfield8/ooo.jpg



trans and oil dipstick and throrrtle cable
http://i1137.photobucket.com/albums/n502/satterfield8/oooo.jpg

dipstick in there
http://i1137.photobucket.com/albums/n502/satterfield8/ooooo.jpg

pulleys
http://i1137.photobucket.com/albums/n502/satterfield8/oooooo.jpg

[85ss]

Nice parts...
Good choice on the Wiles driveshaft!!! :thumbup:
I have been running there shaft since my truck was built with no problems...

[satterfield8]

good to here thanks

[satterfield8]

done a little the past couple days got my front shockes on, pulleys/belt, washed it, and went to put my starter on to big and its a mini starter to some this is the one im going to get this now thanks to timmy aka (East End Riders) http://www.summitracing.com/parts/PRO-67052/ should work just fine but heres a couple pics and i got a digtal camero some soon pics will be better quilty



gauges all in just need hooked up

http://i1137.photobucket.com/albums/n502/satterfield8/012.jpg



pulleys on

http://i1137.photobucket.com/albums/n502/satterfield8/015.jpg



what it looks like with air cleaner need to cut the stud though

http://i1137.photobucket.com/albums/n502/satterfield8/018.jpg



http://i1137.photobucket.com/albums/n502/satterfield8/100_0482.jpg

[satterfield8]

got a little down today mounted the fuel cell now just need the fuelline i order which is coming tomorrow and a got my plug wires on them cut to fit plug wires are a pain but heres a couple pics



http://i1137.photobucket.com/albums/n502/satterfield8/100_0485.jpg



http://i1137.photobucket.com/albums/n502/satterfield8/100_0484.jpg

[satterfield8]

got my mickey thompson et street radials today there 275/60/15 pretty nice tire and i got some other little stuff did do much but put the little stuff on today



http://i1137.photobucket.com/albums/n502/satterfield8/100_0491.jpg



http://i1137.photobucket.com/albums/n502/satterfield8/100_0493.jpg



pic of motor with T-sat housing on it looks a lot better then tap

http://i1137.photobucket.com/albums/n502/satterfield8/po.jpg

[chevelledaddy]

Very Nice!!!!

[satterfield8]

Thanks!

[85ss]

Getting closer!!!

[satterfield8]

Yepp just got my mudulater vavle finally hooked took forever to find a fitting that would work and i just got 3/4 of my fuels system done

[littlewickeds10]

keep up the good work!

[satterfield8]

Will do only thing i did today was my fuel system but i got a battery


http://i1137.photobucket.com/albums/n502/satterfield8/100_0567.jpg



1040 CA at 0 and 880 at 32
http://i1137.photobucket.com/albums/n502/satterfield8/100_0569.jpg

[Randy 406]

Looking good!!

If that isn't a points distributor, you don't need that ballst resistor.

[East End Riders]

Looking good austin.

[sgblazer2]

coming together nicely!

[satterfield8]

Thanks! Guys and randy 406 mallary recmaneds a ballast for that dist

[85ss]

Looking good!!

If that isn't a points distributor, you don't need that ballst resistor.

Thanks! Guys and randy 406 mallary recmaneds a ballast for that dist

Mallory does recommend a ballast with that dist, but be very careful with it anyways...
The ignition module in them are like glass...
VERY SENSITIVE!!!
I fried 3 before I said forget it and went MSD...
The modules are 100 bucks each and hard to get...
Make sure that new battery is fully charged BEFORE you install it...
DO NOT TRY TO CRANK IT WITH A CHARGER ON IT, IT WILL FRY THE MODULE!!!
Just a heads up...
Good luck with it Austin...

[satterfield8]

i got a power filter to but i no about the modules prob my dad had the same prob in his old nova he fried 2 of them but all he had was a ballast he never had a power filter so hopefully that will help it

[Rickracer]

I have never had ANYTHING on ANY of my vehicles with the Mallory name on it, on any of my vehicles, that didn't fail or give me major problems. I won't even touch a Mallory product now. :evil2: :evil2: :dead:

[satterfield8]

i bought it before i even had my truck prob had if for over 1 and a half so its in there now and im going to use it run low on money to change it so its stay for now

[85ss]

I have a Mallory ignition box and love it!!!
Have a Mallory coil as well, no problem's with either this far...
As for the distributer, it was a pain, it quit twice in the staging lanes at a race...
I replaced it once more and that one only fired the truck one time!

Many reviews online about them, some say if you have the correct stuff to go along with it they will run forever, some say junk...

I'm not dogging your stuff Austin, just gave ya the heads up and wish you the best of luck with it... :thumbup:

[satterfield8]

oh no prob man just saying i was hoping since i have a ballast and a power filter which they say is so the modulae wont get a high voltage spark and fry its self so having those things hopefully it wont happen

[satterfield8]

got some stuff today and put my battery box and new starter on



http://i1137.photobucket.com/albums/n502/satterfield8/ppll.jpg



new throttle linkage

http://i1137.photobucket.com/albums/n502/satterfield8/pplll.jpg



new starter and powerfilter fit like a glove

http://i1137.photobucket.com/albums/n502/satterfield8/starter.jpg

[East End Riders]

Looking good.

[satterfield8]

Thanks!

[satterfield8]

Got a bunch done today got my core support all weld up and cut for raditor put my raditor in got my throttle cable all hooked up which was a pain in the a** also mowed the grass and i got my wheels this morning heres a couple pics



suprise

http://i1137.photobucket.com/albums/n502/satterfield8/aa.jpg



weld knock offs 15x8 for the back and 15x7 for front

http://i1137.photobucket.com/albums/n502/satterfield8/100_0571.jpg



got my throttle bracket and throttle cable hooked up

http://i1137.photobucket.com/albums/n502/satterfield8/100_0572.jpg



Updated pic of motor

http://i1137.photobucket.com/albums/n502/satterfield8/aa2.jpg

[Diabolical]

Man, Your almost there bro.. When are we going to hear it run?
Everything looks great!

Mike

[satterfield8]

hopefully some how regging to started but my birthday is june 21 first so i would love for it to start then but well see this rains not helping to much

[satterfield8]

Ok guys got ALOT done to got it all wired up everything works but headlights for some reason got my raditor and hose all in trans lines in raditor filled up and trans bunch of other stuff tomorrow might be the day it starts or tues idk yet but i do know tues is my birthday and i will get my liscense if i pass the driving test heres a couple pics

yes im going to clean the wiring up
http://i1137.photobucket.com/albums/n502/satterfield8/mz.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/mz2.jpg

http://i1137.photobucket.com/albums/n502/satterfield8/mz3.jpg

Click the pic and look i got spark all i need is gas and then boom and im the one that acutal wired everything up instead of my dad it realy wasnt as bad as i thought im proud of my self on that on
http://i1137.photobucket.com/albums/n502/satterfield8/th_0619111732a.jpg (http://s1137.photobucket.com/albums/n502/satterfield8/?action=view&current=0619111732a.mp4)

[satterfield8]

Ok guys i got it running first off so heres the story got the tach wired up cleaned up the wiring tighting some stuff up then got around to try to start it turned over blablabla hit one lick sound healthy then it wonted start then noticed a bad fuel leak end up being a diafram so went to town but a rebuilded kit it was only 20 more then a difram so why not just put some more new stuff in it so i got that done stuck it onter no more gas leaks but it was trying to start but never did found out it was 180 degrees out so we retimed it and boom it fried right up got it at like 2100 for about 6 mins then it was real hot 240 so we shut it off to cool down then add some more trans fluid and then after that strated it back up ran it for a min or so then it had a bad trans leak it was the bottom line on the raditor so thats as far as we got but it sounded great no knocks good throttle response for some reason the video makes it look like it dont held a soild 60 pounds of oil presure so all in all im proud of my self that i got my goil complete and tomorrow this stroy will proceded heres a video it ant worth a crap though

http://www.youtube.com/watch?v=KreOuRAAI60

[danman]

Good job Man!

[85ss]

Awesome!!!
Congrats Austin...
I hope to see that truck at Gleason some time, or maybe even Jackson!

[satterfield8]

maybe one haha jk but it will be soon so todays my birthday now i need to finsh break in so i can here it idle sounds good at 2000 grand should sound even better around 800

[85ss]

maybe one haha jk but it will be soon so todays my birthday now i need to finsh break in so i can here it idle sounds good at 2000 grand should sound even better around 800

Happy Birthday...

[satterfield8]

Thanks!

[littlewickeds10]

happy birthday austin

[satterfield8]

Thanks! about to go take my driving test to see if i get my licsense

[satterfield8]

well guys im officially a licensed drive:rock:

[satterfield8]

well guys got it started back fixed the trans leak everything going good the a it starts back fire then notice plug wire on fire so now i have to wait tell i get some more plug wires tell we get to start it again kind of pissed at my self that i didnt notice it before the start heres a pic

http://i1137.photobucket.com/albums/n502/satterfield8/plugwire.jpg

[Diabolical]

Yeah, I bet it runs a whole lot better once you get that fixed. :)

Congrats... Remind me where you live so I can stay off the streets your getting ready to terrorize!
;)
Be safe bro..

Mike

[satterfield8]

Thanks i live in tennessee so your safe but the new wires are soupssod to be here today but i think it wont be till tomorrow but well see but when they get here it will run again

[satterfield8]

well guys yesturday was a good day got must of the little stuff fixed put my shiter in cable all hooked up wiring cleaned up then my plug wires came and i got to work doing that then i got that done ran the fuel system a diff route and fired it up ran it for about 16 mins so with the other times it ran about 24 all together so if it will quit raining today i might have some videos later heres a couple pics of what i was doing

http://i1137.photobucket.com/albums/n502/satterfield8/bv2.jpg

put a lift on it haha jk
http://i1137.photobucket.com/albums/n502/satterfield8/bv.jpg

shifter
http://i1137.photobucket.com/albums/n502/satterfield8/bv3.jpg

[satterfield8]

It runs and drives now so we adjusted the rockers and carb a little still need to do some more but it's all close but it sounds healthy here is a video of my dad driving wasnt trying to get on it to hard because the instrument cluster isnt bolted done yet but you can see his side ways mark before the video and the brakes dont work that good niether so thats why no burnout videos

http://www.youtube.com/watch?v=TjxnbXMI-hM

[satterfield8]

here's another

http://www.youtube.com/watch?v=no31PuSBBu8

[chevelledaddy]

Sweeeet!!!!

[satterfield8]

Yepp we just took it down the road its fast kind of scary almost

[Diabolical]

Congrats!
Now fix them brakes!! ;)

[satterfield8]

oh we did before we took it down the road they work good now just had to bleed them man this thing is fast i was exepcting it and we only got half throttle if that no over 4 grand it fast got a little squirrwly when it shifted in second and its got some power in thrid my buddy about my age has a 79 c10 with a 350 882 heads a 480 summit cam kind of fast so this what im comparin it to hand its totally diff my truck prob has more power in thrid then his does in first

[Diabolical]

Awesome..
Get it to the track and you will really get to see how fast it is..
I'm building a 383 right now to.. getting ready to start a build thread when I find the time.

Mike

[satterfield8]

soon hopefully got to get our tires mount get tags and exhuast ppl were staring hard at us yesturday with open headers

[RedRider85]

Just got done with a cammed up 355 for my friends 79 z28. Drove it around the block with open headers........ didn't make it 1/4 mile before getting stoped by the MP's. Just finished the exhaust and now it's a head turner. You truck sounds pretty good man. Glad to see you got it running. Keep it up.

[wade w]

Good to see you got it running. Be carefull with that thing out on the road.

[spib]

CONGRATS!!!!!!
its so much fun when you get to go test them out

[satterfield8]

Thanks guys i no i wonted to drive it some more but didnt wont the cops showin up niether so we drove it like a mile maybe just to give it a spin

[s10nation]

nice looking build , congrates on getting it running cant wait to see it all finished up .

[85ss]

Congrats on getting it running Austin...
Sounds good...

Let me know when you take it to the track, I'll try and come run with ya...

[satterfield8]

Thanks guys and jeremy sounds sweet to me and FYI dont ever try to do a burnout with no back shocks dont fell so good

[Diabolical]

hahaha!!

[85ss]

Thanks guys and jeremy sounds sweet to me and FYI dont ever try to do a burnout with no back shocks dont fell so good

:laughoutloud:

[satterfield8]

gave me a head ache i thought the dash was about to fall off moved my fuel pump some have i think my motor moved didnt se any broken motor mounts though didnt look at trans and in knock my negitive battery cable losse top of my battery box fell off and some other stuff but it got good for a couple seconds tell wheel hop happened

[Diabolical]

Lesson learned!

[satterfield8]

yea a very big one

[satterfield8]

well guys been a couple days i got some stuff done i put my back wheels on got some shocks fixed some little stuff got exhaust and tags on it no the exhaust is 2.5 what they recommend with the flowmaster 10 dump before the rearend not as load as i thouhgt but it has a good sound to it i will post a video and a couple pics later after i wake up but we drove it some got about 50 miles on it now we drove it to the local dragstrip we were going to run it just a couple shack done passes nothing serious at all but i had a little leak but when we got there it was just to bad to run its that cheap 2 piece timing cover so today im reaping it all back apart to fix it and we couldny stay long because the headlight wires missed up

[satterfield8]

sorry no pics today ill get them tomorrow but today i did a little yesturday before we went to the races my dad adjust the rockers and after driving it a little while it start to miss a little on take but was fine after that sense we didnt get to race yesturday he got on it a little pulling out of the races well it stumbled and then took off no prob and who ever s10's dont get traction for some reason mines just hooks and books idk i guess because the et streets it doesnt spin but to he thought he might of tighting one a little tight so today we redid them before we tore it apart to fix the oil leak passeger side was fine went to the drivers side took the vavle cover off and one of the rockers was sideways so that would explain the sputring he forgot to tighting the allen head on the polley lock so got that fixed and i guess even with the rock missed up last night it was still fast i wasnt in the truck i was behind it in my other truck and my dad gave one of my buddys a ride all it does is squaed and its gone i just thought it was cool that it still took off so fast not even all the way on it with the rocker missed up

[satterfield8]

ok heres a couple pics ill post a video after i put it back together

shocks and the et streets put on
http://i1137.photobucket.com/albums/n502/satterfield8/0701110948.jpg

random pic
http://i1137.photobucket.com/albums/n502/satterfield8/0701110949.jpg

[satterfield8]

ok guys heres a video it sounds pretty good ecspecilly when you give it some gas

http://www.youtube.com/watch?v=NZPxYOdQikM

[85ss]

Sounds good Austin! :thumbup:

[satterfield8]

Thanks

[East End Riders]

Sounds good

[satterfield8]

Thanks and does everybodys s10 not get traction cause i no mine does it just does not spin just hooks and books

[wade w]

What are your plans for paint? Truck has come along nicely so far.

[Toecutter]

Thanks and does everybodys s10 not get traction cause i no mine does it just does not spin just hooks and books

Thats untill that stock rearend brakes:scared0016:

Nice project you got there I look forward to seeing your update's:thumbup: