List of stuff I will be needing very soon

[85cam]

Motor plates for BBC
BBC headers
External balancer for BBC
th400 transbrake
roll cage, min of 6 point
bbc roller lifters in better shape than what I have right now
advise on setting up these ladders bars while keeping the leafs
If you have or have access to any of these things let me know please

[dand355]

look in classified

[85cam]

i did but must have missed something
you know something I don't? LOL

[85cam]

Got an intake
Need everything else

[jdrags10]

Jegs 550-40603
http://www.jegs.com/p/Jegster/Jegster-Axle-Housing-Floater-Kit/744049/10002/-1
And set the bars so that the front is down 2 degrees from the rearend. Set the pinion angle at neutral on both U joints then down 2 degrees in the rear. Example if the front U joint angle is 1 degree down to the rear end and the U joint in the rear is 4 degrees up to the tranny split the difference till they are the same degrees then put the rear one down 2 degrees from there. And Use ladder links. 247-2005
http://www.jegs.com/p/Competition-Engineering/Competition-Engineering-Ladder-Bar-Link-Kits/743901/10002/-1

[85cam]

Jegs 550-40603
http://www.jegs.com/p/Jegster/Jegster-Axle-Housing-Floater-Kit/744049/10002/-1
And set the bars so that the front is down 2 degrees from the rearend. Set the pinion angle at neutral on both U joints then down 2 degrees in the rear. Example if the front U joint angle is 1 degree down to the rear end and the U joint in the rear is 4 degrees up to the tranny split the difference till they are the same degrees then put the rear one down 2 degrees from there. And Use ladder links. 247-2005
http://www.jegs.com/p/Competition-Engineering/Competition-Engineering-Ladder-Bar-Link-Kits/743901/10002/-1


That is EXACTLY the parts I am ordering! I hope they come with instructions as good as yours!

[85cam]

http://www.jegs.com/images/photos/55040787.gif

Very intersting to say the least
Why would they give these dimensions, seems as if you could take this and make your own.

[jdrags10]

Shhh What I just gave you is the way mine is set up. Everyone has their own way of doing it but I have 4 different cars other than mine that are hooking killer with small tires and no wheelie bars. With this setup. The only bad thing is you want to get some good externally adjustable shocks with this set up so you can fine tune the compression and rebound. And you can build your own floaters pretty easily.