Decisions decisions

[96407s10]

Well I am in the market for a new carb as mine was stolen off the truck in front of my house in the driveway. I had a proform race 750 on it with a dart single plane but, I don't want to buy another carb and then upgrade later down the road. So I would rather upgrade now and save some money.

What would be the best route to get the most power out of it?

I have been looking at doing a tunnel ram setup from summit.
http://www.summitracing.com/parts/CMB-03-0184/

or doing a super victor intake for a dominator.
http://www.summitracing.com/parts/EDL-2970/

and a dom 1050
http://www.summitracing.com/parts/HLY-0-8896-1/

Best time with it so far is a 10.58 @ 126 with the 750 proform on it.
Engine specs...
407 sbc eagle 4340 crank, eagle H beams, srp flat top pistons.
Dart II heads fully worked, comp around 12.1, ultradyne solid roller. 264/264 @ .050 .632/.632
Hedman hustler 1 7/8 fenderwell header
Dart high rise single plane intake, msd pro billet, 6al, blaster 2 coil
crower 1.5 roller rockers, girdles on top and bottom end

JW th350, ultrabell 5,000 stall 3.73 in rear but will be swapping back to the 4.56

[spib]

I would get ahold of pro systems carb
and run one of there carbs they build for your set up and a super victor intake

[406shark]

I would get ahold of pro systems carb
and run one of there carbs they build for your set up and a super victor intake

I agree. Give Patrick at Pro Systems a call. I love my Pro Systems carb, and you can't beat the after the sale support. He even gives you a cell number you can call while at the track for help.


Jeff

[Diabolical]

x3 on the Pro Systems carb..
That's my next investment!

btw.. sorry for your loss.. Bastards!!

[spib]

x3 on the Pro Systems carb..
That's my next investment!

btw.. sorry for your loss.. Bastards!!

yes I agree mike, thats bull , sorry to hear some low life stole your stuff

[96407s10]

thanks guys

I will send the request form in from their site and see what they want and suggest.

[85ss]

Pro Systems carbs is the way to go...
I love mine...
Patrick is awesome!!!

[96407s10]

Well I sent in the request and this morning I already have a answer.
Patrick suggest a pro series 4150. I believe I will go that route. Thanks guys

[85ss]

Well I sent in the request and this morning I already have a answer.
Patrick suggest a pro series 4150. I believe I will go that route. Thanks guys

Awesome...
Can't go wrong with it...

[spib]

For the money you will be happy

[BOUTTIME]

I really like my PROS SYSTEM carbs,....both of em'
http://www.s10racer.com/board/picture.php?albumid=98&pictureid=1998

[spib]

I really like my PROS SYSTEM carbs,....both of em'
http://www.s10racer.com/board/picture.php?albumid=98&pictureid=1998


SHOW OFF!!!!!!!!! dont blame you I would show them twins off, on that bad ass truck

[96407s10]

What truck all is see is a bad ass engine. lol

[96407s10]

Carb should be here at the end of next week. I had my machinist order the carb and saved me some money to put into another area.

[96407s10]

I'm finally getting home at 11:18 pm to find a present waiting for me.

http://www.s10racer.com/board/picture.php?albumid=177&pictureid=4083

[Diabolical]

Nice!!!!
Someday...

[85ss]

Nice!!!

[96407s10]

I will get to test it out Friday night night. Truck feels good so it should do good.

[spib]

those carbs are nice, I really like the large sight glass on the fuel bowls, and they run damn good also, you will be happy:rock::rock:

[96407s10]

I was just digging through my old post and noticed, I never did a follow up on this carb.

The carb runs great the best with the 750 proform was a 10.58. The new carb runs right in the 10.52-10.55 I honestly think that with a lil tuning the proform would have been right with the pro systems carb not too bad for a out of the box universal race carb.