PDA

View Full Version : LSX10.. Here are a couple of pics

Diabolical
05-10-2009, 11:13 PM
Here are some pics..Still waiting for the paint to dry on the other stuff..
These pics don't do the bars any justice.. They are KILLER!! :27:

Everything is TIG welded
http://s10racer.com/board/picture.php?albumid=38&pictureid=534
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=534
http://s10racer.com/board/picture.php?albumid=38&pictureid=534

Some shots
http://s10racer.com/board/picture.php?albumid=38&pictureid=533
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=533
http://s10racer.com/board/picture.php?albumid=38&pictureid=533

Front Bracket
http://s10racer.com/board/picture.php?albumid=38&pictureid=532
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=532
http://s10racer.com/board/picture.php?albumid=38&pictureid=532

Rear Bracket
http://s10racer.com/board/picture.php?albumid=38&pictureid=531
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=531
http://s10racer.com/board/picture.php?albumid=38&pictureid=531

Another full view
http://s10racer.com/board/picture.php?albumid=38&pictureid=530
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=530

Oh yeah!
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=541
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=541
http://s10racer.com/board/picture.php?albumid=38&pictureid=530
mytmouz
05-10-2009, 11:45 PM
Looking good!
lsx10
05-11-2009, 01:29 AM
SWEET!!

(does happy dance around room)
(wife laughs at me)
(stops doing happy dance)

cant wait

are the holes in the front and back brackets for adjustability?
I just went and picked up u bolts for this thing like 2 weeks ago... damn
on that subject these are for the 3 3/8ths axle tubes right?
Diabolical
05-11-2009, 02:31 AM
Well..they measure 3 1/8th
If you cant use them just save them for the next project ;)

You have 15 different set ups you can use.
3) on the leaf spring pre load
3) on the front bracket
3) on the back
Do the math and you will see it ;)

Everett will tell you.. I have it set up for the kill!!
01XtremeLT1
05-11-2009, 06:59 AM
: Drools :

Those look real good. I know I'll be having you make me a set here shortly for my red turtle. Probably after the 8.8 gets installed.
dand355
05-11-2009, 07:04 AM
:thumbsup:
lsx10
05-11-2009, 03:30 PM
Well..they measure 3 1/8th
If you cant use them just save them for the next project ;)

You have 15 different set ups you can use.
3) on the leaf spring pre load
3) on the front bracket
3) on the back
Do the math and you will see it ;)

Everett will tell you.. I have it set up for the kill!!

sweet i'll bore them out or make them fit, any new on the x member?
Diabolical
05-11-2009, 06:44 PM
The Cross Member is done too..
Everything shipped today..

Some pics
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=538
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=538
http://s10racer.com/board/picture.php?albumid=38&pictureid=538

Another
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=536
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=536
http://s10racer.com/board/picture.php?albumid=38&pictureid=536

And another
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=539
http://s10racer.com/board/picture.php?albumid=38&pictureid=539
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=539

Full View
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=535
http://s10racer.com/board/picture.php?albumid=38&pictureid=535
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=535

Yep..its strong!!
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=540
http://s10racer.com/board/picture.php?albumid=38&pictureid=540
http://www.s10racer.com/board/picture.php?albumid=38&pictureid=540
lsx10
05-11-2009, 08:58 PM
damn, I wasnt planning on running 6 inch duals, but why not! looks great mike, disreguard the pm I sent. no worries on the U bolts, I already got a set.
434 smallblock
05-17-2009, 08:05 AM
damn boy I think I need to show you how to weld:laughoutloud: J/K everything looks great . Now get back to work:10:
ChevyToyR1
05-17-2009, 01:48 PM
looks good.. it would look better if it where in my truck :21: ..

i think thats what im going to do.. im tired of takeing my trans in and out of the luv this is the 3rd time this month and it still not working :2up: ...