Off to the Dyno!!

[85ss]

I am finially going to get my motor dynoed!!!
I wanted to get it done before we put it in but I ran out of time (trying to make the s10 meet) and they were pretty booked up also...
But I found out yesterday that he can get to it this week...
Gonna pull the motor tonight...
Taking it Thursday evening...
I know it seems like alot of work just to dyno it, but it will save me many nights at T&T trying to get it tuned right...

[85ss]

Anybody that wants to take a guess at the numbers, here are the specs...

406 GM block
Eagle internals, internal balance
SRP/Je Dome tops 14.2:1 cr
Edelbrock Victor Jr. heads (port matched to 1206)
Brodix valve springs good for .750 lift, 2.08/1.65 Manely SD valves, 10degree locks, titanium retainers
Brodix HV1000 intake (port matched to 1206)
Solid Roller 264/276 @.05 106c
.688/.672 lift
MSD Pro Billet 85551 distributor
Pro Systems 950 carb (true 968cfm)

[jdrags10]

600-650 hp. Just guessing

[mytmouz]

660

[1slowdime]

663

[wikd]

take ur nos kit and have em hit it one time... im bettin 650 to 700 hp off the juice... take the pills and have them give it a one time... they dont have to tune the engine for it but i wanna see what it hits on the bottle...

[Kelly Kilbourne]

My guess is 580 too 630 HP. What victor heads do you have on the motor and how much work is done to the heads.

[spib]

good luck to you!!!!!

[Diabolical]

I bet it makes more power than mine!
What do I win? :)

[85ss]

My guess is 580 too 630 HP. What victor heads do you have on the motor and how much work is done to the heads.

77598's
They have been milled to 58cc...
Manely server duty ss valves...
Titanium retainers...
Changed over to 10 degree locks from 7...
Hand ported to port match the 1206 gasket...
Brodix GA1000 valve springs...

[85ss]

Thanks guys...
I am going to try and get a video of a pull or two...

[421s10]

well we are still waiting

[85ss]

Leave today at 4:00 pm...

http://i854.photobucket.com/albums/ab102/jeremy_0624/Just%20Pics/c5d55441.jpg

[Diabolical]

Right on bro :)

[421s10]

[QUOTE=85ss;20620]Leave today at 4:00 pm...

surely you have made it home by now give us some numbers bro...lol

[85ss]

Well it servived 11 pulls...
Max Hp was 578.4 @ 6500
Max Tq was 540.5 @ 5100

First pull was 568.8 @ 6400 and 535.1 @ 4900
So it wasnt far off...
Little lean and the timing was a little high...

It wants a 2" HVH super sucker spacer...
Didn't add alot of hp, but made a more smooth increase on the graph and quicker acceleration... 3-4 hp gain throughout most of the pull range... 4500-7000

Biggest gain was fuel...
I have been running Torqo 116...
They wanted to try some VP 113...
Picked up a AVERAGE of 8 hp and 9 ft tq from the base run...
It actually picked up 16.5 hp & 18.5 ft tq at the lower end of the pull...
Guess that is a good thing because the place I buy my fuel drums has switched from the Torqo to the VP...
AND the VP 113 is $3.23 a gallon cheaper... :rock:

Over all the Averages were this...
Average Hp- 542.0
Average Tq- 499.2
Average Acceleration- 496

I am very pleased with it...
He said the heads were holding it back...
Said some good port work on the heads and the intake and he would guarentee 60-80 hp gain at the minimum...

[421s10]

that is awesome bro

[wikd]

no juice numbers??? come on... chicken...

[1slowdime]

Some good numbers you might also try some Sunoco i bet its cheaper than that VP and just as good if not better.

[85ss]

Some good numbers you might also try some Sunoco i bet its cheaper than that VP and just as good if not better.

Its real hard to get Sunoco around here...
I havent found anywhere that carry's it locally...
I dont wanna have to get it shipped... lol

[85ss]

I just realized this in the electrical forum...
Sorry...
Mike you can move it if you want...

[spib]

congrats on motor my friend, hope it hauls ass and gets you many wins:rock::rock::rock::rock::rock::rock:

[Diabolical]

Sunoco and VP here all day..
Those numbers will work!
Get the suspension tuned and that truck will haul ass!
You already knew this ;)

[Diabolical]

I just realized this in the electrical forum...
Sorry...
Mike you can move it if you want...

hehe.. I was wondering why it was posted here.. Its moved now :antlers:

[Kelly Kilbourne]

So did I win the contest.......I said about 580hp????? What did I win? Get those heads opened up and you will see more ponies for sure. So send me the heads and some $$$ and get those ponies. Glad it did good for you.

[85ss]

So did I win the contest.......I said about 580hp????? What did I win? Get those heads opened up and you will see more ponies for sure. So send me the heads and some $$$ and get those ponies. Glad it did good for you.

I guess we need to talk then. I am considering having them done.

[434 smallblock]

I guess we need to talk then. I am considering having them done.

I have seen Kellys work it is topnotch you will not be dissapointed

[Kelly Kilbourne]

I have seen Kellys work it is topnotch you will not be dissapointed

Thanks Everett. Give me a shout some time.

[sgblazer2]

I have seen Kellys work it is topnotch you will not be dissapointed

i'll second that...top notch!!!:)

those numbers sound good glad it was a productive day!

[1fast10]

we picked up 8hp from 116 down to 110 on dyno also. my engine builder told me if he could get 87 octane to run he would becuase it would make more power. nice numbers and good luck at the track

[jameskirk1]

Great job man - congrats!

[85ss]

Thanks guys...
Im gonna try and get the motor put back in this weekend...
Havent had time and we got flooded last weekend... lol
Should have it at the track next weekend...