Drag truck cooling

[85ss]

What kind of radiator are you running on your drag only trucks. I was running a be cool 32" 2 core with 2 10" fans. Never had a problem with heat. Just kinda looking to save some weight and i'm sure a smaller radiator will help. Any input or pics is appreciated. Thanks

[Disturbing V6]

Run the dual core becool direct fit. With the flexalite fan for the stock s-10 radiator with modified brackets to fit.

[spib]

http://www.summitracing.com/parts/SUM-380645/?rtype=10
thats the one I use, wish cap was bigger , its small cap but it works, I use 2 10 inch fans, want to up garde fans to dual lo profile fans

[Diabolical]

I run a Griffin Dual core S10 unit with dual 10" fans

[DOUBLE D]

I priced the S10 direct fit from be cool with 2-13"fans, and custom shroud for $1350.00... Then I found the exact thing from PRCHOTROD.COM with a 2 year warranty. It is the S10 direct fit unit (2 rows of 1" tube) for $880.00, ask for shawn 812-897-5805. They have some other very nice products on that site.

[bigfoot385]

I use a stock S10 radiator with 2 fans and shroud. Pic in album.

[mark markow]

http://www.summitracing.com/parts/SUM-380645/?rtype=10
thats the one I use, wish cap was bigger , its small cap but it works, I use 2 10 inch fans, want to up garde fans to dual lo profile fans

x2 i use the same radiator . it works well. i can usualy drop 10 degrees coming back from a run. i think i could get by on the street with it. maybe my moter just runs pretty cool. but yes the small cap is a pain to fill.

[deimos]

buy an easy fill funnel problem solved looks like the route I would have went but instead I cut and made the upper radiator support to get mine to fit

[85ss]

Thanks for the reply's, already changed it over...
Went from a dual row 19 tall X 32 wide rad to a 19 tall X 20 wide...
Redone the entire core support to where there isn't much there....lol
Pics...
http://www.s10racer.com/board/picture.php?albumid=409&pictureid=5511

http://www.s10racer.com/board/picture.php?albumid=409&pictureid=5513

[sgblazer2]

looking good jeremy!!

[bigfoot385]

Looks Good!! That should keep it cool!!

[85ss]

looking good jeremy!!

Thanks Sean...

Looks Good!! That should keep it cool!!

Thanks Randy...
It does pretty good...
I have 1- 15" electric fan as a puller and the block is 3/4 filled with block fill and I don't have a issue...