Afr 227 sbc, 406 nos short block, brodix hvh

[*hotrods*]

SBC 406 NOS short block with about 10 passes went 10.34 in 3400lb truck. Scat lighweight 4340 crank, Scat 4340 H Beam Rods, JE NOS Dome pistons with Hellfire Rings. Splayed Billet main caps, balanced and assembled. $2900REDUCED $2700 REDUCED $2600
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/4062.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/406.jpg

New IN BOX - Passenger side upper tubular Control Arm for S10 made by Speedway Motors. Does not come with screw in balljoint. $40
New Weld Draglites 15X15 5X5 4.5"bs. I used these to roll my truck around while building it only! $300

Hydroboost booster and mastercylinder from a 1994 Astro van. These work great on S10's with a little modifications to the mounting bracket. $75


Cloyes SBC Hex Adjust timing chain used half season. Paid $130 and will let someone have it for $60

Canton SBC Drag Racing oil pan part#13-080. Gold Iridited 5 qrt crank scraper, windage tray and trap door. Used for half season and it will come with oil pump and pickup if needed. The oil pump is a Milling part#10553 and was used hald a season as well. $125
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/oilpan1.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/oilpan.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/oilpan2.jpg

SBC ARP Oil Pump Chromemoly Shaft. $10

SBC ARP Fuel Pump Chromemoly Push Rod. $10

[Diabolical]

Damn.. Those are some bad ass heads!!

[mytmouz]

I hate being broke...

[az03sonoma]

I hate being broke...

X2.... :veryangry:

I'm sure they will sell soon... good deals.


Tony

[*hotrods*]

Thanks and thats why I'm selling so I can finish my new engine. LOL

[AlteredRacer]

wow, why is my timing always wrong, could use these heads for my 421 build for my altered, sucks being broke, especially right after christmas

[Diabolical]

wow, why is my timing always wrong, could use these heads for my 421 build for my altered, sucks being broke, especially right after christmas

X2.. I could buy them right now but would be able to finish in time for the March Meet..
The wife has put me on a budget :nono:

[434 smallblock]

Damn you got me thinking

[*hotrods*]

Come on guys don't be afraid of your woman, it only hurts for a few days! LOL All jokes aside when I was looking for a set of 23* heads these were the baddest I could find! I don't think you will find a better set and flowing heads than these. They are loaded up with all the goods! They have been polished every place, they have dual exhaust patterns and have been clearanced for the Jesel Pro Rockers. I hate to even sell them but I found a set of Pro Action 14* BES Racing heads with 285 length runners that flow 401 @ 700 and I had to buy them for my 455 SBC I'm building right now. Trust me the new heads cost me a lot more and my head is still hurting from the skillet I got hit with by the wife! LOL

If someone from this site buys these heads I will throw in the rockers and stud girdles for the $2200 price!! :yikes:You wont find a better deal guys!!

Kevin

[Diabolical]

Damn...

[*hotrods*]

Need to move these heads Price Reduced to $2100!! You can't go wrong with this deal guys!!

[Diabolical]

PM sent

[*hotrods*]

PM Return, sale pending on Heads, Intake, Rockers and Girdle

[*hotrods*]

Updated parts list guys!

[*hotrods*]

PHOTO'S ADDED AND REDUCED PRICES! Send me reasonable offer guys!

[mytmouz]

I can't believe someone hasn't snapped up the headers...

[*hotrods*]

I can't believe someone hasn't snapped up the headers...


I agree, there is no way I can replace them at this price! Oh well I wanna give all my S10RACER friends first chance at them and then they go to ebay. I need to move them to fund my other engine.

Kevin

[mytmouz]

Maybe you need to put up a separate post on them, I have looked at your ad a few times, never really noticed them that far down in the post. Just a thought...

[*hotrods*]

Maybe you need to put up a separate post on them, I have looked at your ad a few times, never really noticed them that far down in the post. Just a thought...

Idk you would think with the photo's added now it will get attention. LOL

[mytmouz]

Maybe, but most won't look after the first time, so they won't see them, plus if they just click the link from the main page it will take them to the last place they were in the thread, so they won't see them...

[mytmouz]

SBC 406 NOS short block with about 10 passes went 10.34 in 3400lb truck. Scat lighweight 4340 crank, Scat 4340 H Beam Rods, JE NOS Dome pistons with Hellfire Rings. Splayed Billet main caps, balanced and assembled. $2900REDUCED $2700
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/4062.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/406.jpg

NOS Pro Fogger bent for SBC comes complete with fogger nozzels, Pro Fogger Fuel and NOS Solenoids, complete jet pack 175hp - 450hp and fuel/NOS blocks. Comes complete with 10 lb bottle and feedline. This was professionaly bent for a Brodix HVH SBC intake! $650
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/fogger.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/fogger1.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/fogger2.jpg

New IN BOX - Passenger side upper tubular Control Arm for S10 made by Speedway Motors. Does not come with screw in balljoint. $40
New Weld Draglites 15X15 5X5 4.5"bs. I used these to roll my truck around while building it only! $300

Hydroboost booster and mastercylinder from a 1994 Astro van. These work great on S10's with a little modifications to the mounting bracket. $75

S10 heater box to convert a A/C equiped S10 to just a regualar heater. This gets rid of all that ugly A/C crap on the firewall. $40

ARP SBC Head studs for Aluminum Heads. These will fit AFR, Brodix, Dart, Edelbrock and stock confirguration 23 degree. They were used half season and torque down twice. $75

Headman Hustler Fenderwell Headers Jet Coated 2" primarys and 3 1/2" collector with evacualators installed as well as header flange. I used these for half season and they are in excellent condition. I purchased these from Jet Hot and paid $945 for them. I'm only selling cause I'm going to 14 degree tall deck SBC and can't use them. $700
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/headers1.jpg

http://i7.photobucket.com/albums/y290/faith624/406%20Parts/headers2.jpg

http://i7.photobucket.com/albums/y290/faith624/406%20Parts/headers.jpg
Isky Solid Roller Cam used only half season. 602/602 lift 300/300 duration 108 Centerline standard size. Cam is in excellent condition buy it for over half off cost. $150 REDUCED $140
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/406roller.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/406roller1.jpg

Crowler Solid Roller lifters part#66200 Vertical Bar .842 these have only been used half season and are in excellent condition. I paid $439 for these at Summit. Save BIG $200

Cloyes SBC Hex Adjust timing chain used half season. Paid $130 and will let someone have it for $60

Canton SBC Drag Racing oil pan part#13-080. Gold Iridited 5 qrt crank scraper, windage tray and trap door. Used for half season and it will come with oil pump and pickup if needed. The oil pump is a Milling part#10553 and was used hald a season as well. $125
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/oilpan1.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/oilpan.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/oilpan2.jpg

SBC ARP Oil Pump Chromemoly Shaft. $10

SBC ARP Fuel Pump Chromemoly Push Rod. $10

SBC Race Pumps Fuel Pump part #1500. Pump was used half a season and is in excellent condition. I paid $300 for it and will sell for $150 REDUCED $135
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/racepumps.jpg

Also MSD 85551 Billet Distributer in excellent condition. $160

This way they won't have to scroll back, lol...

[*hotrods*]

Thanks Mytmouz

[jameskirk1]

PM Sent

[*hotrods*]

pm replied

[*hotrods*]

Thanks for payment James for MSD Distributor. I will ship today!

[jameskirk1]

;)

[jameskirk1]

Hey bro got it today everything looks great, thanks for an easy transaction

-James

[*hotrods*]

reduced 406 to $2500 FIRM, FOGGER $600, OIL PAN $100, FENDERWELL HEADERS $650

[*hotrods*]

Fogger and Headers sold!